Diaphragm pumps FM917 and FM1101

Fürgut miniature diaphragm pumps for 6, 12 and 24 V

Diaphragm pumps also convey humid gases and liquids and are suitable for aggressive media. Fürgut builds them with Ryton or PA housings and precise DC motors.

The FM917 and FM1101 are each available for 6, 12 and 24 V.

Request a quote

Flow rate

up to 1.79 l/min

Vacuum

up to 340 mbar

Pressure

up to 555 mbar

Voltage

6, 12 and 24 V

Why a diaphragm pump?

The diaphragm completely separates the medium from the drive. This makes the pump insensitive to moisture and suitable for liquids and aggressive gases.

For humid gases and liquids
Well suited to aggressive media
Low current consumption
Long service life at reduced voltage
Housing made of Ryton or PA

Typical applications

Analysers

Conveying gas and liquid samples.

Medical technology

Small, quiet pumps for devices.

Dosing

Conveying small quantities of liquid.

Environmental measurement

Humid samples without condensate problems.

Technical data

Types: FM917 F6V, FM917 F12V, FM917 F24V, FM1101 F6V, FM1101 F12V, FM1101 F24V. Each pump is specified at several operating voltages: at rated voltage and at reduced voltage. The current applies at minimum and maximum load in each case.

FM917

Type	Item no.	Diaphragm	Weight	Rated current	Operating voltage	Flow rate	Vacuum operation				Pressure operation
Type	Item no.	Diaphragm	[g]	[mA]	[V]	[l/min]	Current min. [mA]	Current max. [mA]	[mbar]	[dB(A)]	Current min. [mA]	Current max. [mA]	[mbar]	[dB(A)]
FM917 F6V=	0917060	Silicone	29	370	6	0,84	45	48	220	–	45	60	200	–
					4,5	0,85	44	49	240	–	40	50	220	–
					3	0,32	36	42	260	–	32	50	240	–
					2	0,32	23	43	260	–	23	47	240	–
					1,5	0,57	20	50	270	–	19	50	400	–
FM917 F12V=	0917012	Silicone	29	320	9	0,93	35	38	190	–	31	38	160	–
					6	0,53	33	34	210	–	25	39	230	–
					4,5	0,33	26	34	220	–	22	38	240	–
					3	0,32	21	36	230	–	17	40	250	–
FM917 F24V=	0917024	Silicone	29	140	15	0,94	22	23	190	–	21	26	180	–
					12	0,65	20	21	210	–	19	25	220	–
					9	0,37	17	20	220	–	17	25	220	–
					6	0,29	13	20	230	–	14	23	240	–
					4,5	0,37	11	20	230	–	13	23	240	–

Diaphragm pumps FM917 and FM1101: FM917

FM1101

Type	Item no.	Diaphragm	Weight	Rated current	Operating voltage	Flow rate	Vacuum operation				Pressure operation
Type	Item no.	Diaphragm	[g]	[mA]	[V]	[l/min]	Current min. [mA]	Current max. [mA]	[mbar]	[dB(A)]	Current min. [mA]	Current max. [mA]	[mbar]	[dB(A)]
FM1101 F6V=	0112101	Silicone	37	370	6,0	1,27	110	120	265	74	85	105	315	72
					4,5	0,96	95	125	305	70	65	105	415	66
					3,0	0,65	60	105	300	55	60	110	325	54
	0112115	EPDM	37	370	6,0	1,56	105	135	260	72	100	125	335	76
					4,5	1,06	85	140	300	64	85	145	415	66
					3,0	0,60	70	130	300	62	70	140	210	60
	0112126	Viton	37	370	6,0	0,75	150	195	330	59	150	175	555	66
					4,5	0,53	125	190	295	54	140	195	485	60
					3,0	0,35	110	155	110	45	125	170	130	45
FM1101 F12V=	0114001	Silicone	37	320	12,0	1,79	90	90	185	72	85	95	280	72
					9,0	1,16	75	90	235	69	70	100	340	65
					6,0	0,75	60	90	195	64	60	100	250	57
	0114015	EPDM	37	320	12,0	1,78	70	75	250	75	70	80	310	78
					9,0	1,36	60	70	340	71	60	90	445	70
					6,0	0,75	50	70	320	66	50	90	370	65
	0114026	Viton	37	320	12,0	1,05	105	120	240	63	125	125	280	66
					9,0	0,75	95	120	195	62	115	115	210	62
					6,0	0,56	90	115	90	55	115	115	95	56
FM1101 F24V=	0116001	Silicone	37	140	18,0	1,27	50	60	240	69	50	65	315	67
					15,0	1,01	50	60	250	67	50	65	315	62
					12,0	0,75	45	55	230	59	45	60	260	58
	0116015	EPDM	37	140	18,0	1,42	45	55	310	71	45	50	400	77
					15,0	1,22	40	55	145	63	40	50	460	69
					12,0	0,80	35	55	170	58	35	60	450	60
	0116026	Viton	37	140	18,0	0,75	70	80	255	59	65	70	520	62
					15,0	0,55	60	75	290	53	60	70	500	59
					12,0	0,45	55	70	220	52	55	75	350	52

Diaphragm pumps FM917 and FM1101: FM1101

Diaphragm pump for non-toxic and non-explosive gases / liquids
Illustrations/data/diagrams not binding

Dimensions

Type	Length [mm]	Width [mm]	Height [mm]	Motor Ø [mm]	Connection nozzle [mm]	Connection spacing [mm]
FM917	37,7	17	25,3	16	Ø 3,5 / Ø 2,95	7
FM1101	42,2	22	36,5	16	Ø 4 / Ø 3,4	9

Diaphragm pumps FM917 and FM1101 – dimensions

Frequently asked questions

Which media can be conveyed?

The diaphragm pumps are designed for non-toxic and non-explosive gases and liquids. For other media, we will be glad to advise you.

Can I run the pump at a lower voltage?

Yes. The DC pumps can be operated at reduced voltage; flow rate and pressure then decrease and service life increases. The table shows the values for several voltages.

Are the pumps suitable for installation in devices?

Yes, that is what they are made for: small, light and with low current consumption, for example for analysers, medical and laboratory technology. For series production, we define the right version with you.

Where can I get pumps and spare parts?

From us. We supply Fürgut pumps individually and for series production, advise you on the selection and obtain replacements when a pump needs to be exchanged after many operating hours.

Downloads

Data sheet FM917 F6V

Download

Data sheet FM917 F12V

Download

Data sheet FM917 F24V

Download

Data sheet FM1101 F6V

Download

Data sheet FM1101 F12V

Download

Data sheet FM1101 F24V

Download

Which pump suits your device?

Flow rate, pressure or vacuum, voltage and installation space determine the choice. We advise you and supply the right Fürgut pump, including for series production.

Request a quote

Contact