Multipin feedthroughs
Vacuum components from VACOM
With various connector types and numbers of contacts, multipin feedthroughs offer many options for transmitting measurement, control and regulation signals. Other types are also available on request (e.g. Sub-C).
Versions
Push-pull compact power
The robust push-pull compact power feedthroughs allow proven push-pull connectors to be used in high and ultra-high vacuum applications.
Sub-D
Sub-D feedthroughs are available in pin/pin and socket/pin designs. The most commonly used pin/pin design comes in three variants for different technical requirements.
Sub-D Power
Sub-D Power uses the same shell sizes as Sub-D, but with a few high-current contacts for up to 40 A per contact. Versions with 3, 5 and 8 contacts are available in pin/pin design.
Sub-D HD (high density)
Sub-D HD (‘high density’) uses the same shell sizes as Sub-D, but with a higher contact density. Versions with 15, 26, 44, 62, 78 and 104 contacts are available in socket/pin design (pin/pin partly available on request).
Micro-D
Micro-D feedthroughs offer the highest contact density (up to 100 contacts) with connectors on both sides for applications up to ultra-high vacuum.
Type MIL-DTL-26482
Multipin feedthroughs to MIL-DTL-26482 offer a high contact density, small flange sizes and three options for the vacuum-side cable connection.
Type MIL-DTL-5015
Multipin feedthroughs to MIL-DTL-5015 allow high currents using air-side connectors in several shell sizes and numbers of contacts.
High voltage 3 kV DC
Multipin feedthroughs of category MPC2HV3 transfer high voltage up to 3 kV with connectors on both sides for up to 32 contacts (41 contacts available on request).
High voltage 12 kV DC
Multipin feedthroughs of category MPCHV12 transfer high voltage up to 12 kV with an air-side connector for up to 7 contacts.
USB
USB feedthroughs (2.0 or 3.0, type A) allow signals and data to be transmitted via USB connectors through the wall of a vacuum system.
RJ45
VACOM’s exclusive RJ45 feedthrough allows data to be transmitted via RJ45 Ethernet connectors in vacuum applications.
Accessories – multipin feedthroughs
Air-side and vacuum-side connectors ensure reliable contact with feedthroughs and must be assembled with suitable cables.
Which component fits?
Nominal diameter, flange type, pressure range and material determine the choice. We advise you, put together components from the entire VACOM range and also source special versions.